Communication Parameters; Baud Rate; Checking The Dsp7000-To-Pc Connection; Gpib Communication Check - Magtrol DSP7000 User Manual

Chapter 8 – Optional Equipment
8.3.3 C
oMMuniCaTion
• No parity
• 8 data bits
• 1 stop bit
• No protocol
8.3.4 B r
auD aTe
There are eight different baud rates to choose from including 300, 600, 1200, 2400, 4800, 9600,
19200 and 115200. To set up the desired baud rate, follow the instructions below.
1. Press ShIFT and release.
2. Press the SETUP button. The display will appear as shown in Figure 3–5 Setup Menu.
3. Press SCALE P button to select system.
3. Press MAx SPEED button until the desired baud rate is reached.
4. Press ShIFT 2 times to exit and return to main menu.
8.4

CheCking the dsp7000-to-pC ConneCtion

8.4.1 gpiB C
oMMuniCaTion CHeCk
1. Launch the application Measurement and Automation Explorer in PC desktop.
p
araMeTerS
Figure 8–16 Measurement and Automation Explorer Window
98
Magtrol Model DSP7000 Dynamometer Controller