Logging On To Nokia Ip40 Security Platform - Nokia IP40 User Manual

The IP40 can connect to a central management server to allow central management of the
firewall and VPN policies. Central management can also allow the IP40 to subscribe to
additional services such as antivirus and URL filtering. The central server can be either a Check
Point Smart Center, Smart Center Pro, or Sofaware Management Portal.
If your IP40 is centrally managed by any of these servers, check I wish to connect to a service
center and enter the IP address of the central management server in the Specified IP text box,
then click Next. You are then prompted to enter the authentication information that allows the
IP40 to communicate with the management server where you previously defined the IP40 object.
If your IP40 is not managed by a central management server, check I wish to connect to a service
center, and click Next.
For information connecting to service centers, see
Nokia IP40"
Managed Services"

Logging On to Nokia IP40 Security Platform

When you exit from the Setup wizard, the IP40 Welcome screen appears. The following section
shows how to log on subsequently.
To access the user interface of the Nokia IP40 Security Platform
1. Open your Web browser, and enter http://my.firewall in the address bar.
2. Click Enter.
The Nokia IP40 initial login window opens.
3. Enter the password directly for the IP40 Tele 8 license.
For the IP40 Satellite X licenses, enter the username and password. If you are logging on for
the first time, use admin as the username.
Nokia IP40 Security Platform User's Guide v2.0
on page 70. For information about how to use subscription services, see
on page 241.
Making Initial Nokia IP40 Security Platform Settings
"Managing Large Scale Deployments of
"Using
55