Nokia IP40 User Manual page 97

Note
The DHCP server is supported on a DMZ network.
The following procedure explains about how to configure and edit DMZ networks by using the
Nokia IP40 graphical user interface:
To configure or edit DMZ network
1. Choose Network > My Network page, and click Edit next to DMZ.
The Edit Network Settings window opens.
2. From the Mode drop-down list, select Enabled.
3. In the IP Address text box, enter the IP address of the DMZ network default gateway.
Note
The DMZ network must not overlap the LAN network.
4. Enter the value of the subnet mask.
5. From the Hide NAT drop-down list, select Enabled or Disabled.
6. To enter the DHCP range manually, uncheck the Automatic DHCP Range check box.
7. Enter the DHCP range in the provided text boxes.
8. Click Apply.
The DMZ network values are successfully saved. Enter the new values as required to edit
the configured values.
Nokia IP40 Security Platform User's Guide v2.0
Configuring Network Settings
99