Nokia IP40 User Manual page 31

Figure 1 Rear panel of Nokia IP40
Table 9 Rear Panel of IP40
Label
Power
AUX
LAN
DMZ
(WAN2)
WAN
Nokia IP40 Security Platform User's Guide v2.0
Description
A power jack used to supply power to the device.
Connect the power adapter to this jack. The device
connects to the power source.
The auxiliary port or dial-in port is a 9-pin male
connector. This port is used to dial in to IP40 through a
modem when the IP40 is unreachable through other
ports.
Local area network. Ethernet port (RJ-45) used to
connect computers or other network devices.
Demilitarized zone. Ethernet port (RJ-45) used to
connect computers or other network devices. Similar to
LAN port in operation.
This can be used as WAN2, secondary WAN
connection.
Wide area network. An Ethernet port (RJ-45) used to
connect your cable or xDSL modem.
Overview
33