Enabling And Disabling The Dhcp Server - Nokia IP40 User Manual
Security platform
Hide thumbs
Also See for IP40:
- User manual (244 pages) ,
- Quick start manual (4 pages) ,
- User manual (194 pages)
Table of Contents
Advertisement
6
Managing Your Local Area Network
Enabling and Disabling the DHCP Server
Nokia IP40 Security Platform has a built-in Dynamic Host Configuration Protocol (DHCP)
server that is enabled by default. This allows the IP40 to configure all the devices on your
network automatically.
If you have another DHCP server configured in your network, you must disable the DHCP
server in your IP40 before you connect the IP40 to the network.
To enable or disable the DHCP server
1. Choose Network from the main menu.
The Internet window opens.
2. Click My Network.
The My Network window opens.
3. To configure the DHCP server for LAN/DMZ settings, click Edit next to
The Edit Network Settings window opens.
96
Nokia IP40 Security Platform User's Guide v2.0
LAN/DMZ.
Advertisement
Table of Contents
