Nokia IP40 User Manual page 104

6
Managing Your Local Area Network
same network. To allow incoming traffic to a host for which static NAT is defined, You must
create an Allow rule.
Note
While specifying firewall rules to such hosts, use the internal IP address of the host. Do not
use the Internet IP address to which the host IP address is mapped.
To configure static NAT for a single computer
1. Choose Network from the IP40 main menu.
The Internet window opens.
2. Click the Network Objects tab.
The Network Objects window opens.
3. Click New.
The Network Object wizard with Network Object Type window opens
4. To configure static NAT for single computer, select Single Computer.
106 Nokia IP40 Security Platform User's Guide v2.0