Compaq PowerStorm 1000 Owner's Manual page 90

Event Log Messages
Table D-1 (cont.) Windows NT Event Log Messages
Message
No supported VOM
detected.
Only one Image
Rendering Module
detected - System
Performance
Degraded.
Invalid texture
memory
configuration
detected
Invalid PixLink
memory
configuration
detected.
Event data has been
lost.
A Local Bus parity
error has been
detected.
An Hbus time-out
error has been
detected.
D–2 DIGITAL PowerStorm 1000 Graphics Subsystem Owner's Guide
Parameters Description
VOM Type The VOM type code read from the Graphics
Code Interface Module Status registers was not x
indicating that a Standard Resolution Module
was present or y indicating that a High
Resolution Module was present. The Type Code
displayed is the value of the type code bits that
were contained in the Graphics Interface
Module Status register.
IRM Mask Only one Image Rendering Module was
detected. IRM Mask will be 1 – the value of the
Image Rendering Module configuration bits
read from the Graphics Interface Module Status
register.
IRM0 TM Size Either no texture memory is installed on any
IRM1 TM Size Image Rendering Module or the Image
IRM2 TM Size Rendering Modules installed have different
IRM3 TM Size amounts of texture memory. The parameter
values indicate the amount of texture memory
installed on each Image Rendering Module
specified in MB, the size will be zero for an
Image Rendering Module that is not installed.
IRM0 PLM Size The Image Rendering Modules installed have
IRM1 PLM Size different amounts of PixLink memory. The
IRM2 PLM Size parameter values indicate the amount of
IRM3 PLM Size PixLink memory installed on each Image
Rendering Module specified in MB, the size
will be zero for an Image Rendering Module
that is not installed.
Number of lost Events are being generated faster than they can
events be logged and some event messages have been
discarded. The parameter value indicates the
number of events that have been discarded.
Workstation The Workstation Interface Board has detected a
Interface Board parity error on it's local bus. The parameter
Status Register value is the contents of the Workstation
Interface Board Status register.
Workstation The Workstation Interface Board has detected a
Interface Board Hbus time-out. The parameter value is the
Status Register contents of the Workstation Interface Board
Status register.