Table of Contents
Advertisement
3.6 Verify Display Properties
Verify the display properties and that the device drivers are registered as described below.
Verify that the PowerStorm 1000 subsystem has started.
Enter the Display Applet by right clicking on the Desktop and then going through the
Properties, Settings, and Display Type Menus.
•
Adapter Type should be: Entry, Full, or High Resolution
•
Manufacturer should be: DIGITAL
•
Current Files should be: rw.sys,rw.dll
Properties
OK?
Verify that the PowerStorm 1000 device drivers are registered:
Enter the Devices Applet by going through the Start, Settings, Control Panel, and Devices
Menus.
Once in the Devices menu, scroll down until you find "rw" – this is the PowerStorm 1000
miniport device driver.
•
Status should indicate :Started"
•
Startup should indicate "System"
Drivers
OK?
Yes
Go to
Section 3.7
No
Yes
No
DIGITAL PowerStorm 1000 Graphics Subsystem Owner's Guide 3–5
Troubleshooting
Go to
Section 3.8
Go to
Section 3.8
Advertisement
Table of Contents
Troubleshooting
