Quick Reference Guide For Implementing A Safety System - ABB ACS880-07 User Manual

10 Introduction to the manual

Quick reference guide for implementing a safety system

Task
Select the appropriate functional safety standard for the implementation: EN ISO 13849-1,
EN/IEC 62061, IEC 61511 or other.
If you select EN/IEC 62061 or IEC 61511, make a safety plan. See EN/IEC 62061 or IEC 61511.
Assess safety: analyze and evaluate risks (estimate SIL/PL) and define risk reduction strategies.
Define the safety requirements.
Design the safety system. The part of the design made by ABB is described in chapter
description and instructions
If you made any changes to the delivered safety system, verify the achieved SIL/PL with, for
example, FSDT-01 Functional safety design tool or similar. See Functional safety design tool user's
manual (3AXD10000102417 [English]).
Connect the wiring. See section
Set the parameters. See section
Validate that the implemented system meets the safety requirements:
• Do the acceptance test. See section
Write the necessary documentation.
on page 11.
Wiring on page 17.
Parameter settings
Start-up and acceptance test
on page 16.
on page 18.
Option