Related Standards And Directives; Compliance With The European Machinery Directive - ABB ACS880-07 User Manual

Related standards and directives

Standard
EN 60204-1:2006 + AC:2010
IEC 60204-1:2016
IEC 61508-1:2010
IEC 61508-2:2010
EN 61800-5-2:2007
IEC 61800-5-2:2016
EN 62061:2005 + AC:2010 +
A1:2013 + A2:2015
IEC 62061:2015
EN ISO 12100:2010
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN ISO 13850:2015
IEC 61511-1:2016
IEC 61326-3-1:2008
2006/42/EC
Other

Compliance with the European Machinery Directive


The drive is an electronic product which is covered by the European Low Voltage
Directive. However, the drive internal safety function of this manual (option +Q951) is in
the scope of the Machinery Directive as a safety component. This function complies with
European harmonized standards such as EN/IEC 61800-5-2. The declaration of
conformity is delivered with the drive.
Name
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 1: General requirements.
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 2: Requirements for electrical/electronic/
programmable electronic safety related systems.
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Safety of machinery – General principles for design – Risk assessment
and risk reduction
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
Safety of machinery – Safety-related parts of control systems – Part 2:
Validation
Safety of machinery. Emergency stop. Principles for design
Functional safety – Safety instrumented systems for the process industry
sector – Part 1: Framework, definitions, system, hardware and application
programming requirements
Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 3-1: Immunity requirements for safety-related
systems and for equipment intended to perform safety-related functions
(functional safety) – General industrial applications
European Machinery Directive
Machine-specific C-type standards
Option description and instructions 33