Quick Reference Guide For Implementing A Safety System - ABB ACS880-07 User Manual

10 Introduction to the manual
The system integrator (or other responsible party) must make sure that the entire
implementation complies with all relevant standards, directives and local electrical code,
and that the system is tested, verified and validated correctly.

Quick reference guide for implementing a safety system

Task
Select the appropriate functional safety standard for the implementation: EN ISO 13849-1,
EN/IEC 62061, IEC 61511 or other.
If you select EN/IEC 62061 or IEC 61511, make a safety plan. See EN/IEC 62061 or IEC 61511.
Assess safety: analyze and evaluate risks (estimate SIL/PL) and define risk reduction strategies.
Define the safety requirements.
Design the safety system. The part of the design made by ABB is described in chapter
description and instructions
Verify the achieved SIL/PL with, for example, FSDT-01 Functional safety design tool or similar. See
Functional safety design tool user's manual (3AXD10000102417 [English]).
Connect the wiring. See section
Set the parameters. See section
Validate that the implemented system meets the safety requirements:
• Do the acceptance test. See section
Write the necessary documentation.
on page 11.
Wiring on page 15.
Parameter settings
Start-up and acceptance test
on page 14.
on page 16.
Option