Setting The Dc Source Mode - YOKOGAWA 765501 User Manual

5.4

Setting the DC Source Mode

Procedure
5-6
DISPLAY
ESC
MEASURE
AUTO
V I Ω
STORE
RANGE
MENU MEASURE
NULL
RECALL MATH
COMPARE VALUE
LOCAL
POWER MISC TIME
KEY LOCK
SHIFT
1. Press MODE to display the source mode menu.
Selecting the DC Source Mode
2. Press the DC soft key.
Setting the Source Value (Source Level)
3. Use the rotary knob or numeric keys and < and > keys to set the source
value.
4. If you use the numeric keys, press a soft key corresponding to the desired unit
or the Enter soft key to confirm the setting.
• To exit the menu during operation, press
SOURCE
• In the procedural explanation below, the
MODE LIMIT VS IS
MENU SOURCE
RANGE
AUTO
RANGE
OUTPUT CONTROL
SWEEP START TRIG
MODE
ZERO OUTPUT
ESC at the upper left of the operation
panel.
phrase "rotary knob, numeric keys, <,
and >" are used to refer to the operation
of selecting or setting items or entering
values using the rotary knob, numeric
keys, , and keys (BS key and
right arrow key). For details on the
operation using the rotary knob, numeric
keys, , and , see sections 3.8 or
3.9.
IM 765501-01E