Monitored Lines Based On Broadsoft's Broadworks Blf Service; Table A-1: Led Behaviors On An Ip Phone In A Shared Call Appearance Group - AudioCodes 440HD User Manual

400hd series of high definition ip phones, hd voip
Hide thumbs Also See for 440HD:
Table of Contents

Advertisement

Table A-1: LED Behaviors on an IP Phone in a Shared Call Appearance Group

State
When the phone is in idle state
When a phone is seized (off hooked)
When an outgoing call is progressing
When a call comes in
When a phone is busy (active)
When a phone is put on hold
A.1.2

Monitored Lines Based on BroadSoft's BroadWorks BLF Service

This section shows how to configure Monitored Lines based on the BroadWorks BLF service,
typically used by executive assistants or front desk operators to monitor lines in the network.
Notes:
The feature can also be configured by the network administrator from the Web interface.
See the Administrator's Guide for detailed information.
Before configuring monitored lines, your network administrator must enable the BLF service
feature in BroadSoft's BroadWorks server. See the Administrator's Guide for detailed
information.
To configure a monitored line:
1.
On the device, long-press a Programmable Key or a Function Key, and in the Line Key /
Function Key screen that opens (respectively), navigate to and select Speed Dial + BLF; the
Line Key or Function Key screen (respectively) opens.
Note:
Up to six Programmable Keys and up to 12 Function Keys can be configured as Speed
Dial + BLF.
2.
Enter the telephone number to assign the speed dial to. For Function Keys you can select
the number from the Directory.
3.
Navigate to enter a label (Programmable Key only), and then press the Save softkey.
4.
View the line number displayed in the LCD's idle screen / BLF (440HD only).
User's Manual
Phone
No LED indications on any phones
Off hooked phone
Other phones in the group
Calling phone
Other phones in the group
All phones
Active phone
Other phones in the group
Phone on hold
Other phones in the group
82
430HD and 440HD IP Phone
LED Behavior
No behavior
green
Solid
(for a 15
second default timeout)
Solid
red
(for a 15
second default timeout)
Solid
green
red
Solid
Fast flashing
green
Solid
green
red
Solid
Slow flashing
green
Slow flashing
red
Document #: LTRT-11928

Advertisement

Table of Contents
loading

This manual is also suitable for:

430hd

Table of Contents