Overlapped Stitching Pattern - JUKI IT-10 Instruction Manual

(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
C
A
B
B
d
D
2
3) Change the number of stitches for the selected process by using
4) Press switch 3 to confirm the change you have made.
(The sewing machine does not run unless the setting has been confirmed by pressing
The overlapped stitching pattern is carried out under automatic operation mode. Once the pedal
is depressed, the sewing machine will automatically perform sewing of the number of overlapped
stitches.
A : Number of stitches of normal stitching setting
C
0 to 15 stitches
B : Number of stitches of reverse stitching setting
0 to 15 stitches
C : Number of stitches of normal stitching setting
0 to 15 stitches
D : Number of times of repetition
0 to 9 times
(Caution) When process D is set to 5 times, the sewing is repeat-
3 4 5 6
ed as A / B / C / B / C.
[Setting procedure of the overlapped
stitching]
1) Effective/ineffective of the overlapped stitch-
ing pattern can be changed over by press-
ing
When the overlapped stitching pattern is
rendered effective, LED D lights up.
2) Select a process (A, B, C or D) the number
of stitches for which is to be changed by us-
ing switch 4 .
The number which is flashing on and off
represents the process which is being set.
switch 5 and
– 6 –
switch 2 .
switch 6 .
switch 3 .)