JUKI IT-10 Instruction Manual page 11

Sewing can be performed with the production support data displayed on the control panel.
[Basic operation of the production support modes]
E
7
4) When you keep
they are flashing on and off, data marked with (*2) in Table 1 "Display under modes" can be changed by press-
ing switch 5 and
When you press
flashing on and off.
5) The value with a sharp mark (*3) in Table 1 "Display of modes" can be changed only immediately after reset-
ting by using switch 5 and
6) Refer to the table "Mode resetting operation," for the resetting procedure of data.
7) To return to the normal sewing state, press
Data to be displayed under the respective modes are as described in the table below.
Table 1: Display of modes
Mode name
Target No. of pcs. display
mode (F100)
Target/actual No. of pcs.
difference display mode
(F200)
Sewing machine availabili-
ty rate display mode (F300)
Pitch time display mode
(F400)
sewing
Average speed
display mode (F500)
Bobbin counter display
mode
A
3 4 5
switch 6 held pressed for two seconds, indicator
switch 6 .
switch 7 , the value marked with (*2) is confirmed and indicator
switch 6 .
Indicator A
Actual number of pieces
[Unit : piece] (*1)
Difference between target
number of pieces and
actual number of pieces
[d : piece] (*1)
oP-r
Pi-T
ASPd
bbn
1) When
B
mal sewing state, LED E lights up to enter
the production support mode.
2) Production support function can be changed
over by pressing
switch 4 .
3) Data attached marked with (*1) in Table 1
"Indicator
switch 5 and
6
switch 7 .
Indicator B
Target number of pieces
[Unit : piece] (*2)
Target pitch time
[Unit : 100 msec] (*2)
Sewing machine avail-
ability rate in the previous
sewing [Unit : %]
Pitch time in the previous
sewing [Unit : 1sec]
speed
Average sewing
the previous sewing [Unit :
sti/min]
Bobbin counter value (*3)
– 9 –
switch 7 is pressed in the nor-
switch 3 or
" can be changed by means of
A
switch 6 .
and LED flash on and off. While
B E
and LED
B
Indicator B (when
switch is pressed)
5
-
-
Display of average avail-
ability rate of sewing
machine [Unit : %]
Display of average pitch
time [Unit : 100 msec]
Display of average sew-
in
speed
ing
[Unit : sti/min]
-
stop
E