No. Switch Input Procedure Under Normal Startup Mode - JUKI IT-10 Instruction Manual

ID is indicated successively from the first 4 digits.
If the ID is 1234 5678 9ABC DEFG, it is indicated as follows and the indication switches to the
clock when the entire ID is indicated.
Clock indication
Whether the clock is automatically displayed after 3 seconds or by pressing the
be selected using the memory switch.
When the setting to display the clock with the
ed by pressing the memory switch.
(2) No. switch input procedure under normal startup mode
When the 2 out of the 1 to 5 No. switches are pressed successively, ID can be selected from 30 different IDs.
It is considered one-switch operation if one No. switch is pressed and the switch or another switch is not
pressed within 1 second and two-switch operation if the next switch is pressed within 1 second.
* For one-switch operation, the corresponding No. LED lights up. For two-switch operation, the first No. LED
lights up and the second No. LED blinks.
<e.g.> Inputting "3" (one-switch operation)
<e.g.> Inputting "25" (two-switch operation)
After 1.5 seconds
After 3 seconds
– 15 –
After 1.5 seconds
After 1.5 seconds
switch is selected, the selected ID is indicat-
is pressed. ( lights up).
No. switch is input successively for 1 second or lon-
→
ger.
is pressed. ( lights up).
Then is pressed successively within 1
→
second ( blinks).
switch can