Table of Contents
Advertisement
6-5. Setting of functions
Functions can be selected and specified.
※ Refer to the Instruction Manual for the control box for details of the function setting.
7
3
3
3) After completion of the changing procedure, press
If the power is turned OFF before carrying out this procedure, the changed content is not updated.
When
switch 3 is pressed, the display on the panel changes to the previous setting No.
When
switch 4 is pressed, the display on the panel changes to the subsequent setting No.
After completion of the operation, the machine is returned to the normal sewing state by turning
OFF the power and re-turning it ON.
4
5
6
B
4
5
6
switch 3 or
– 11 –
1) Turn ON the power with
pressed.
(The item which has been changed during the
previous work is displayed.)
* If the screen display does not change, re-carry
out operation described in step 1).
Be sure to re-turn ON the power switch
when one or more seconds have passed
after turning it OFF. If the power switch
is re-turned ON immediately after turn-
ing it OFF, the sewing machine may fail
to operate normally. In such a case, be
sure to turn ON the power switch again
properly.
2) To move the setting No. forward, press
switch 4 . To move the setting No. backward,
press
switch 3 .
If the setting No. is moved forward (or
backward), the previous (or subse-
quent) content of the setting is con-
firmed. Be careful when the content of
a setting is changed (when the
switch is touched).
Example)
Changing the maximum number of revolutions
(setting No. 96)
Press
switch 3 or
setting No. "96."
The current set value is displayed on indicator B .
Press
switch 5 to change the setting to
"2500."
* The content of setting of the setting No. returns
to the initial value by pressing
switch 6 simultaneously.
switch 4 to confirm the updated value.
switch 7 held
/
switch 4 to call
switch 5 and
Advertisement
Table of Contents
