Table of Contents
Advertisement
5. Connect Detector to PC or Other
Terminals
5.1 Connect Detector to PC
1. Open the PC software on the computer and use the provided USB
cable to connect this computer with the detector while it is
power on;
2. The <
lighted in blue and a prompt < Connected > will pop up on the
screen of
successfully connected to the control computer;
3. Click the
The
screen
Communicating... >, reminding users that the device is
communicating with the control computer to realize data
exchange and other operations.
5.2 Disconnect Detector from the connected PC
After the detector is successfully connected to the control computer.
1. Users could press <
disconnect the device from the conncted computer;
USB > icon on the status bar of detector will be
detector, reminding users that the device is
Connect icon in the toolbar of the PC software.
of
detector
will
display
OK > key on the
43
a
prompt
<
detector to
Advertisement
Table of Contents
