Plan Setting And Program Selection - PCE Health and Fitness PCE-ATP 1 Manual

key to confirm the setting;
 Move the cursor to the lower limit setting box, press <
key or <
 Press <
return to the test interface, whose current test program will be
the one has been just modified.
Reminding: The detector is stored with 1999 programs that
not marked with the
the default procedure and cannot be modified);
Reminding: In case a program is written by users from PC
software, such program will increase progressively from 1 and
replace the original program with the same number on the
detector. The information about the upper & lower limits, sites
of the program can be freely set on PC software according to
users' requirements.
Reminding: The programs written on the PC software whose
program number is marked with
again on the detector. For details, please refer to 'Portable ATP
Hygiene Monitoring System Software Specification'.

4.2.2 Plan Setting and Program Selection

Plan is written on PC software and imported into the detector via
USB cable. One plan can contain several programs. For details,
please refer to 'Portable ATP Hygiene Monitoring System
Software Specification'.
1. Select <
OK > key to access the < Plan Select > option.
Down > key to set its value;
OK > key tree times to confirm the setting and
icon by default ranging 1~1999 (0 is
Plan > on the setting interface, and press <
icon cannot be edited
37
Up >