3.4
Incoming Indicator Setting
If the optional Incoming Indicator is connected, set it as follows.
1. Click [Incoming Indicator] in the Basic settings sub menu.
2. Select the ringing pattern of the incoming indicator in the [Ringing pattern of each
service], between Same pattern and Different pattern.
Same pattern: Same ringing pattern for any communication service.
Different pattern: Different ringing pattern for each communication service.
3. Check a communication services to ring the incoming indicator.
• Voice: Ring for incoming telephone.
• FAX: Ring for incoming facsimile.
• ISDN UDI: Ring for incoming ISDN UDI data communication (FELCOM500
only).
• ISDN RDI: Ring for incoming ISDN RDI data communication (FELCOM500
only).
4. Click the [Apply] button to conclude the setting.
3. SETTING AFTER INSTALLATION
3-7