Table of Contents
Advertisement
1. HOW TO INSTALL THE UNIT
FB-1500-A/C / FB-1250-A/C: How to install the antenna unit
Carefully unpack the radome and check for damage.
For FB-1500-A/C, the optional kit OP16-55 is necessary to lift the antenna unit.
Lifting tool for antenna: Type OP16-55, Code number 001-121-170
Shackle
Lifting tool for antenna
Procedure
1. For the FB-1500-A/C, do the following:
1) Loosen four lifting lugs and turn them to outside at the bottom of the radome
as shown in the figure below.
2) Then tighten four bolts for lifting lugs firmly. If not tightened, the bolt may loos-
en, causing the antenna unit to fall, when hoisting the antenna unit.
3) Arrange shackle, lifting tool for antenna and lifting lug as shown below.
4) Cover the part of the radome which contacts the lifting tool for antenna with
protective material (rubber mat, etc.), to prevent damage to the radome when
hoisting it to the mounting location.
5) Lift the antenna unit to the mounting location.
Lifting lug
Turn four lifting lugs
to outside.
1-6
Name
JISB2801
16-021-5508-1
Lifting tool
for antenna
Shackle
Lifting lug
For FB-1500-A/C only
Type
000-174-468-10
100-362-721-10
Attachment
Protective
Material
Code no.
Qty
4
1
Lifting tool
for antenna
Radome
Advertisement
Table of Contents
