Table of Contents
Advertisement
3. SETTING AFTER INSTALLATION
3.10
User Registration (for data connection)
Register the IP address of the handset and the PC to the user list to enable data con-
nection from the registered handset and PC. If no IP address is entered, the standby
screen of the handset shows "D: No permission", the Web software screen shows "Da-
ta connection No permission" and data connection from unregistered handset and PC
cannot be enabled.
1. Click [Settings] on the menu bar.
2. Click [Network Settings].
3. Click [WAN].
4. Click [Group Settings] to show the Network settings/WAN/Group settings screen.
5. Click the [Settings] button to show the basic setting screen.
The default setting is "standard IP packet communications service". For SIM card
and you have applied for streaming IP packet communication service, go to step
6. If you have not applied, go to step 11.
6. Click the [Add connection] button to shown the Add connection screen.
7. Enter the service to use in the [Service] box.
Select one among Standard data, 8kbps Streaming, 16kbps Streaming, 32kbps
Streaming, 64kbps Streaming, 128kbps Streaming, and 256kbps Streaming*/ *
FELCOM 500 only
8. Enter the application to use in the [Application] box.
Select among Windows Media Player, Quick Time, Real Player, FTP, and Brows-
er.
9. Click the [Add] button. The message "Completed" appears.
10. Click the [OK] button to erase the message.
3-14
Advertisement
Table of Contents
