GE Druck PC6-IDOS User Manual page 15

Vout
Display Light
Resolution
Event
Key
Timed
Exit
Log
Log
View
Delete
Status
Export
Import
Exit
RS232
Status
Baud-rate
Stop-bits
Exit
Date/Time
Set
View
Exit
Language
Zero
Port
Power_Off
Key
Timed
Exit
Exit
K0354, Iss. 1
FUNCTIONS (MENU 2) Continued.
Switches the Power Supply outputs +10V & +24V ON or OFF
Switches ON or OFF the LED back light.
Selects low, normal or high resolution.
Sets up the event status for RS232 output and for logging functions.
Sets key driven output or logging.
Sets timed output defined by the user.
Reverts back to Pressure Display.
Allows the user to setup, amend and view files for logging.
To select a log file and start logging.
To look at a file.
Deletes a file.
To enable or disable logging.
To export logged files.
To import files from a PC. (see '
Reverts back to Pressure Display.
Settings for RS232 communications.
To enable RS232 communication.
To select the baud rate.
To select the number of stop bits.
Reverts back to Pressure Display.
Sets up Date & Time parameters
Sets the date & time.
To look at date & time.
Reverts back to Pressure Display.
Allows user to change language
Will reset pressure reading to Zero. ( This will remove Zero offset permanently / NOT available for absolute
units ).
Selects current pressure module (P1, P2)
Allows the user to set Power_Off time or to switch the function on or off.
Switches the auto-power function off.
Allows the user to set the auto-power off time in minutes.
Reverts back to Pressure Display.
Returns to Pressure Display
SiCal PRO ' software instructions for exporting files to the PC6-IDOS)
(separate pc software utility needed -contact supplier).
Page 7