Functions (Menu 1) - GE Druck PC6-IDOS User Manual

Pressure calibrator (bench/panel mount version)
Table of Contents

Advertisement

PRESSURE DISPLAY -
Allows the user to operate the PC6-IDOS for pressure measurements. (Display Functions)
Menu 1
Unit
bar
MPa
psi
atm
mH O
2
inHg
UNIT1
Exit
Max
Min
%
Tare
V / mA
Measure
Source
Exit
Switch
Leak
Start
Set-Time
Exit
Temp C
Date & Time
File
View
Export
Import
Delete
Exit
Exit
K0354, Iss. 1

FUNCTIONS (MENU 1)

Selection of pressure unit.
bar
megapascals
pounds force per square inch
atmospheres
metres of water (at 4°C)
inches of mercury (at 0°C)
user defined unit
Returns to menu 1
Displays the maximum pressure measured since the last reset (60 samples per second).
Displays the minimum pressure measured since the last reset (60 samples per second).
Displays the pressure as a percentage between user pre-set high and low alarm values.
Displays the pressure at the time of tare.
Volts / milliamps functions
Displays the following input measurements.
Actual
Displays actual input measurements.
Converted
Displays converted input measurements.
Exit
Returns to Pressure Display.
Displays the following outputs (status must be ON - see 'Setup' in Menu 2)
Actual
Displays actual output measurements.
Converted
Displays converted output measurements.
P to V / P to mA
Displays Pressure to Volts / milliamps conversion.
Exit
Returns to Pressure Display.
Returns to pressure display
Indicates the status of the pressure switch under test (OPEN/CLOSED).
Allows the PC6-IDOS to measure pressure changes over time.
Starts the leak test.
Sets the leak test time.
Returns to Pressure Display.
Allows the user to monitor the temperature around the selected pressure transducer in pressure display mode.
Allows the user to monitor the date & time of the on board real time clock in pressure display mode.
Allows the user to view or manipulate a file previously stored in the filing system.
Allows the user to see logged file.
Outputs a logged file
Imports a file (refer to '
Deletes a single file or all logged files.
Returns to Pressure Display.
Returns to Pressure Display mode.
mbar
kPa
kg/cm²
i
nH O
2
mmH O
2
mmHg
UNIT2
SiCal PRO'
instructions for exporting files to PC6-IDOS)
(SHORTCUT: To abort any menu level, simply press the MENU key).
millibar
kilopascals
kilograms force per square centimetre
inches of water (at 4°C)
millimetres of water (at 4°C)
millimetres
of mercury
(at 0°C)
second user defined unit
Page
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents