6
6. Keys and indicators
T
I/
ENTER
CLR
.
1/F1
2/F2
3/F3
4/F4
5/F5
6/ 0
7/
8/
9/MENU
0/
>
<
∧
∨
indicator
bar indicator
indicator OFF
Max, Min, d, e
USER MANUAL
T = 24,35 C
m = 4,321g
t
= 0:00:00s
m0= 0.000g
START
SET
- tare (subtract package weight from weighed mass)
- switch- on / switch-off (standby),
- confirmation / select the option,
- cancel operation
- decimal point,
- digit key 1 / START – start measurement (drying),
- digit key 2 / SETTINGS – moisture measurement parameters
setting,
- digit key 3 / STAT – drying chart, measurement report,
- digit key 4 / MEM – settings memory,
- digit key 5 / STOP – instant drying termination,
- digit key 6 / zeroing (optional)
- digit key 7 / printout (data transmission),
- digit key 8 / autocalibration (unused function),
- digit key 9 / enter the function menu
- digit key 0 / mode switching (analyser – balance)
- enter the option,
- leave the option,
- navigation / move the cursor up,
- navigation / move the cursor down,
- result stabilisation,
- total load indicator (0-100%),
- stand-by mode (when switched-off with I/ , key),
- metrologic parameters.
RAP
MEM
STOP
%