Initial Moisture Analysis - Axis AGS200/T250 User Manual

11.6 Initial moisture analysis

To determine optimal drying parameters for unknown sample, it is recommended to
perform initial measurement with activated drying chart displaying. To do this, set the
following drying parameters (see Drying parameters setting):
- Operation Mode: Time mode
- Calculation method: m0-m/m0*100%
- Drying temperature:
organic substances: 80 - 120
inorganic substances: 140 - 160
- Samples quantity: do not set
- Sampling interval: 1 second
- Drying time: set time, after which the sample will be definitely dried
To activate displaying of drying chart, which will be visible on the display instead of
humidity indication, perform the following actions
m0-m/m0*100%
T = 32.23C
m= 0.000g
t =0:00:00s
m0= 0.000g
START SET RAP
F1 F2 F3
DRYING REPORT
1. Drying chart
2. Product name
3. Operator
4. Notes
5. Transmission
Exit
DRYING RAPORT
1. Drying chart
2. Product name
3. Operator
4. Notes
5. Transmission
Exit
USER MANUAL
0
C
0
C
Ts=120C ts= 0:10:00s
0.00
%
MEM STOP
F4 F5
: OFF
:
:
:
: OFF
: ON
:
:
:
: OFF
< >
:
Choose RAP option with F3 key,
select
.
ENTER
Choose Drying chart using ∧ and ∨
keys and press ENTER.
ENTER
Using < and > keys choose ON and
press ENTER.
Set the following positions:
- Product name,
- Operator,
- Notes.
Use number keys or external key-
board with PS-2 socket (option).
ENTER
Drying chart and
21
press