About This Guide; Terms/Usage; Copyright And Trademarks - D-Link DXS-1210-10TS User Manual

About This Guide

This guide provides installation and instructions for the D-Link 10 Gigabit Ethernet L2 Switch (DXS-1210-
12TC/12SC/10TS/16TC),
This guide is divided into four parts:
1. Hardware Installation: Step-by-step hardware installation procedures.
2. Getting Started: A startup guide for basic switch installation and settings.
3. D-Link Network Assistant: An introduction to the central configuration utility.
4. Configuration: Information about the function descriptions and configuration settings.

Terms/Usage

In this guide, the term "Switch" (first letter capitalized) refers to the DSX-1210 Series switch and "switch" (first
letter lower case) refers to other Ethernet switches. Some technologies use "switch", "bridge" and "switching
hubs" interchangeably, and all are commonly accepted terms for Ethernet switches.

Copyright and Trademarks

Information in this document is subjected to change without notice.
© 2016 D-Link Corporation. All rights reserved.
Reproduction in any manner whatever without the written permission of D-Link Corporation is strictly
forbidden.
Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft
and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. D-Link Corporation disclaims any proprietary interest in trademarks and
trade names other than its own.
Note: The model you have purchased may
appear slightly different from the illustrations
shown in the document. Refer to the sections for
detailed information about your switch, its
components, network connections, and technical
specifications.
A NOTE indicates important information that
helps you make better use of the device.
A CAUTION indicates the potential for property
damage or personal injury.
1
D-Link DXS-1210 Series User Manual