Stuart Turner CH 4-30 B Installation, Operation & Maintenance Instructions Manual page 22

Briefly reconnect the mains power supply to the pump – the 'power on' light
z
should illuminate if the pump has been correctly wired.
Isolate the mains electrical power supply from the pump.
z
Re fit the terminal box lid ensuring no cables are trapped.
z
Re fit the four terminal box lid retaining screws, tighten to 0.8 Nm.
z
Retaining screws x 4
Fig. 15 Wiring removed for clarity
8.14 Environment Protection: Your appliance contains valuable materials which
can be recovered or recycled.
At the end of the products' useful life, please leave it at an appropriate local civic
waste collection point.
Terminal box lid
- 22 -
'Power
on' light
Note: This image is for
reference only
Cont ...