Removing The Solid-State Drive; Prerequisites; Procedure - Dell XPS 15 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
Remove the base cover.
Procedure
1 Peel and remove the thermal pad from the solid-state drive.
2 Remove the screw (M2x3) that secures the solid-state drive to the system board.
3 Lift the solid-state drive at an angle, then slide and remove the solid-state drive from the solid-state drive slot.

Removing the solid-state drive

computer. After working inside your computer, follow the instructions in After working inside
www.dell.com/
Removing the solid-state drive
5
17