Replacing The Display Assembly; Procedure - Dell XPS 15 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
1 With the display screen facing down, align the screw holes on the display assembly with the screw holes on the palm-rest and
keyboard assembly.
2 Replace the six screws (M2.5x4) that secure the display assembly to the palm-rest and keyboard assembly.
3 Close the display.
4 Connect the antenna cables to the I/O board.
5 Align the screw holes on the wireless-antenna bracket with the screw holes on the I/O board and replace the two screws (M2x4) that
secure the bracket to the I/O board.
6 Connect the display cable to the system board and close the latch.
7 Align the screw holes on the display-cable bracket with the screw holes on the system board and replace the two screws (M1.6x1.8)
that secure the bracket to the system board.
8 Adhere the tape that secures the display-cable bracket to the system board.

Replacing the display assembly

computer. After working inside your computer, follow the instructions in After working inside
www.dell.com/
Replacing the display assembly
24
47