WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the
I/O-board
interposers.
Procedure
1
Using a plastic scribe, push the tab and disconnect the battery cable from the system board.
2
Remove the eight screws (M2x5) that secure the battery to the palm-rest and keyboard assembly.
3
Lift the battery off the palm-rest and keyboard assembly.
4
Turn the computer over, open the display, and press the power button for about 5 seconds to ground the computer.
computer. After working inside your computer, follow the instructions in
Removing the battery
www.dell.com/
Removing the battery
13
After working inside
31