Solid-State Drive; Removing The M.2 2230 Solid-State Drive From Slot 1 - Dell NOT22208 Owner's Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the base cover.
2. Install the SIM card.
3. Follow the procedure in

Solid-state drive

Removing the M.2 2230 solid-state drive from Slot 1

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the base cover.
About this task
The following image(s) indicate the location of the M.2 2230 solid-state drive in Slot 1 and provides a visual representation of
the removal procedure.
60 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.