Replacing The Power Button With Fingerprint Reader; Procedure - Dell XPS 15 Service Manual

Replacing the power button with fingerprint
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Topics:
•

Procedure

• Post-requisites
Procedure
NOTE: Step 2, 4, and 5 are applicable only for the computers that are shipped with fingerprint reader.
1 Place the power button and fingerprint reader (optional) into its slot on the palm-rest and keyboard assembly.
2 Replace the screw (M1.6x1.8) that secures the fingerprint-reader to the palm-rest and keyboard assembly.
3 Replace the screw (M2x1.7) that secures the power button to the palm-rest and keyboard assembly.
4 Adhere the tape that secures the power button cable to the palm-rest and keyboard assembly.
5 Adhere the fingerprint-reader cable to the palm-rest and keyboard assembly.
6 Connect the fingerprint-reader cable to the system board and close the latch.
computer. After working inside your computer, follow the instructions in
www.dell.com/

Replacing the power button with fingerprint reader

22
reader
After working inside
43