WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the
I/O-board
interposers.
3
Remove the battery.
Procedure
1
Using a plastic scribe, disconnect the speaker cable from the system board.
2
Disconnect the LED and microphone cable from the I/O board.
3
Remove the two screws (M2x4) that secure the wireless-antenna bracket to the I/O board.
4
Using a plastic scribe, disconnect the antenna cables from the I/O board.
5
Remove the three screws (M2x4) that secure the Type-C USB bracket to the I/O board.
6
Remove the screw (M2x3) that secures the IO board to the palm-rest and keyboard assembly.
7
Lift the I/O board off the palm-rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
Removing the I/O board
15
After working inside
www.dell.com/
Removing the I/O board
33