WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Using the alignment posts, place the two I/O-board interposers on the system board.
2
Align the screw holes on the I/O-board cable with the screw holes on the I/O-board interposers and adhere the I/O-board cable to
the fans.
3
Replace the four screws (M1.6x5.5) that secure the I/O-board cable to the system board.
Replacing the I/O-board interposers
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the I/O-board interposers
8
23