Table of Contents
Advertisement
4.1 Advanced Wireless Settings
This chapter is about higher-level setting for wireless LAN
Type
BG Protection
Beacon Interval
DTIM
Fragmentation
Threshold
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
Setting for wireless communication when using both 11b and 11g LAN cards.
Recommended for automatic settings in general.
Controls the interval of sending beacon. The setting range is 20~999 and 100ms is
usually used
Controls the data rate of beacon being sent. The setting range is 1~255 and 1ms is
usually used.
When a data that is larger than the threshold size, it is fragmented and sent. Smaller
threshold size may enable more stable wireless communication; however the maximum
speed is lower. Smaller threshold size is recommended in case of many interruptions
from surrounding signals. The setting range is 256~2346.
Description
14
Advertisement
Table of Contents
