Table of Contents
Advertisement
7.4 Port Setting
Settings about wired port. In case of Gateway Mode, WAN port is set here
In case of Gateway Mode, it is better to use the default WAN port number (Port #0)
If you are not administrator, we do not recommend you do this change.
Type
WAN Port
Select the WAN Port in case of Gateway Mode.
Port #0
Enable / Disable Port #0.
Port #1
Enable / Disable Port #1.
Port #2
Enable / Disable Port #2.
Port #3
Enable / Disable Port #3.
Port #4
Enable / Disable Port #4.
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
Description
34
Advertisement
Table of Contents
