Table of Contents
Advertisement
Type
Radio On/Off
Network Mode
SSID
Channel
Broadcast Network
Name
AP Isolation
MBSSID AP Isolation
Type
Operation Mode
Channel Bandwidth
Guard Interval
MCS
RDG
Extension Channel
STBC
A-MSDU
Auto Block ACK
Decline BA Request
HT Disallow TKIP
HT TxStream
HT RxStream
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
Decide radio on/off of wireless AP function.
11b/g/n mixed mode: 802.11b/g/n are supported.
11b/g mixed mode: 802.11b/g are supported.
11b only: only 802.11b is supported.
11g only: only 802.11g is supported.
11n only: only 802.11n is supported
Enter the name of the wireless network.
Select the channel that composes the wireless network.
AP or Wireless network status can be checked by notifying the SSID to the wireless
device. AP cannot be searched if this function is disabled.
The communication between stations that are connected to the identical SSID is
blocked.
The communication between stations that are connected to different SSID is blocked.
Decide whether the PHY mode is going to be Mixed Mode or Green Field Mode.
Fix bandwidth channel to 20MHz.
. Use 40MHz as bandwidth in case connection with wireless station that supports 11n
channel bonding.
Long: 800nsec, Short: 400nsec
Control link rate.
Set link rate to auto considering any interruptions.
The wireless performance can be improved using Reverse Direct Grant, 11n's RDG
technology.
Setting for the other 20MHz area when channel bandwidth is set to 40MHz.
STBC is supported when the value of MCS is 0-7.
Decide whether numerous MSDUs inside one MPDU will transmit.
Decide whether Block ACK will be transmitted automatically.
Decide whether user wants to decline Block ACK request.
Decide whether to operate in 802.11g, if using TKIP.
Setting for number of Tx antennas of 2T2R system.
Setting for number of Rx antennas of 2T2R system.
Description
Description
13
Advertisement
Table of Contents
