Wireless Configuration; Network Interface - Wiznet WizFi210 User Manual

<ESC>W <data of size above>

(6) Wireless configuration

Command Parameters
AT+WRXACTIVE=
n=0 (disable) =1 (enable)
AT+WRXPS=
n=0 (disable) =1 (enable)
AT+MCSTSET=
n=0 (disable) =1 (enable)
<power> 0 to 7 (WizFi210)
AT+WP=
AT+WSYNCINTRL= <n> 1 to 65535.
AT+EXTPA= n=0 (disable) =1 (enable)
AT+PSPOLLINTRL= <n> 1 to 65535.

(7) Network interface

Command Parameters
AT+NDHCP= n=0 (disable) =1 (enable)
AT+DHCPSRV
n=0 (disable) =1 (enable)
R=
<Src Address>,<Net-mask>,
AT+NSET=
<Gateway>
AT+DNSLOOK
<URL>,[<retry>,[<timeout=S>]
UP=
WizFi 210/220 User Manual
Table 22. Wi-Fi security
2 to 15 (WizFi220)
Table 23. Wireless configuration
(WIZnet Co., Ltd.)
Private Key(2)
Format: Binary(0)/Hex(1)
Size: size of the file to be transferred.
Location: Flash(0)/Ram(1)
Ex) AT+WEAP=2,0,100,0 (cont.)
<Esc>W<..data..>
Responses / Effects
If 1, 802.11 radio is enabled.
Ex) AT+WRXACTIVE=1
If 1, Power Save mode is enabled.
Ex) AT+WRXPS=1
If 1, multicast reception is enabled.
Transmit power set to <power>.
Ex) AT+WP=0
Configure the sync loss interval
Ex) AT+WSYNCINTRL=30
Enable/disable the external PA
Ex) AT+EXTPA=0
Configure the keep-alive timer interval
Ex) AT+PSPOLLINTRL=45
Responses / Effects
If 1, DHCP is enabled.
Prior to start the server, the adapter should be
configured with a valid static ip address.
Static network parameters; overrides previous
values.
Ex)
AT+NSET=192.168.3.100,255.255.255.0,192.168
.3.1
Query DNS server for address of hostname
URL.
Ex) AT+DNSLOOKUP=google.com
30