1. Manuals
  2. Brands
  3. Wiznet Manuals
  4. Network Card
  5. WIZ630wi
  6. User manual

Wiznet WIZ630wi User Manual

Hide thumbs Also See for WIZ630wi:
Table of Contents

Advertisement

Quick Links

Download this manual
WIZ630wi User Manual
(Version 0.93)
© 2012 WIZnet Co., Inc. All Rights Reserved.
For more information, please visit our website at
http://www.wiznet.co.kr
1
© Copyright 2012 WIZnet Co., Inc. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for Wiznet WIZ630wi

Summary of Contents for Wiznet WIZ630wi

  • Page 1 WIZ630wi User Manual (Version 0.93) © 2012 WIZnet Co., Inc. All Rights Reserved. For more information, please visit our website at http://www.wiznet.co.kr © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 2: Document Revision History

    Document Revision History Date Revision Changes 2012-01-31 V0.91 © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 3: Table Of Contents

    Serial to LAN(Wired and Wireless) ............33 Main Connection settings ................34 Aux Connection settings ................34 Packing Condition (Incoming serial data packing condition) ...... 35 Ethernet Data Tagging Option ..............35 © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 4 ....오류! 책갈피가 정의되어 있지 않습니다. WIZ630wi Pin Map ................59 Dimensions ....... 오류! 책갈피가 정의되어 있지 않습니다. Serial commands ..... 오류! 책갈피가 정의되어 있지 않습니다. Important Notice ................... 63 © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 5: Introduction

    3G-Router/WiBro-Router through USB interface. Devices that communicates through serial communication use Serial-to-LAN, Serial-to-WIFI, Serial-to-3G, and Serial- to-WiBro; WIZ630wi can be used for TCP and UDP communication to the upper layer administration server. 1.1 EVB Construction 1.1.1.

  • Page 6: Contents

    Serial Cable 2 ea LAN Cable 1 ea LAN Cable WI-FI Jump cable (connection between Module and Antenna) WI-FI Jump 1 ea cable Adapter DC 5V/2A Adapter Table 1. WIZ630wi-EVB Contents © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 7: Hardware Interface

     LAN ports  Serial ports  1 USB  1 Config Switch  WIZ630wi I/F Socket  1 Reset Button  1 WPS Button  Power connector Figure 2. WIZ630wi Interface © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 8: Features

     WEP 64/128bit, WPA/WPA2-PSK TKIP, AES and 802.1x  802.11e and WMM (Wi-Fi Multimedia)  Router and Firewall function supported  Serial to WiFi/Ethernet / Serial to 3G Internet / Serial to Wibro(Wimax) Figure 3. WIZ630wi Functions © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 9: Specifications

    802.11b Outdoor: 150m@11Mbps, 300m@1Mbps Indoor: 30m@11Mbps, 100m@1Mbps 802.11g Operation Distance Outdoor: 50m@54Mbps, 300m@6Mbps (???) Indoor: 30m@54Mbps, 100m@6Mbps 802.11n Outdoor: 30m@150Mbps, 250m@7Mbps Indoor: 20m@150mbps, 100m@7Mbps Antenna 1T1R 2dBi Table 2. WiFi Specifications © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 10: Hardware Specifications

    1.10W = 5V x 200mA + 50mA x 2 (2 LAN ports) 1.20W = 5V x 200mA + 50mA x 3 (3 LAN ports) Dimension 33mm X 43mm X 4.5mm Weight Table 3. HW Specifications © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 11: Software Specifications

    ARP, UDP, TCP, Telnet, ICMP, DHCP, PPPoE, BOOTP, HTTP WEP 64/128bit Security WPA/WPA2-PSK AES/TKIP 802.1x(Radius) Management HTTP, Telnet, Serial, UDP Notification Event Logging Serial To WiFi 2 Serial Port supported 3G router 3G(WCDMA) Router function Table 4. SW Specifications © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 12: Connecting The Webpage Of Wiz630Wi

    2. Connecting the Web page of WIZ610wi  Some items may be not supported depending on the version. 2.1 Web address  Open a web browser on user’s PC. Input the default IP address of WIZ630wi, “192.168.16.254” and click Enter. 2.2 Web Login ...
  • Page 13 System operation mode displayed. Internet Configuration Information of the external network is displayed. Local Network Information of the Local network is displayed. Ethernet Port Status Link of LAN Port status is displayed. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 14: Access Point (Bridge)

    In this mode, all Ethernet ports and wireless interface are bridged together. Wired/Wireless interface has the same IP address space with its top mesh. DHCP Server function is disabled and WIZ630wi does not assign an IP. Wireless (LAN Port included) sending periodic Broadcast Packet to Station and maintains a connection with Station.
  • Page 15 Point-to-Point. There is no communication between the LAN Port and Wireless I/F (ad-hoc). WAN  ad-hoc: OK WAN  LAN: OK ad-hoc  ad-hoc: OK ad-hoc  LAN: No Communication © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 16: Internet Setting

    4. Internet Setting 4.1 Internet connection setting  Select the internet service type and WIZ630wi can connect to the internet  If users would like to access to Internet, Gateway Mode should be selected. Type Description Select the communication ways for Internet’s connection...
  • Page 17 -. This mode supports only 3G-Router, Wibro, Wimax Router firmware 3G Mode -. Connect the 3G modem or WiBro/Wimax modem to the module’s USB port and WiFi/Wired LAN service will be provided. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 18 (Wibro/Wimax supports all USM modems that use Xronet’s chips, and certain USB modems that use Samsung’s WiBro chipset.) © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 19: Local Network Setting

    4.2 Local network setting  WIZ630wi internal IP setting, DHCP server setting and DHCP. Type Description Enter the module’s IP. (Basic Value : 192.168.16.254 ) IP Address Enter the module’s Subnet Mask . Subnet Mask MAC Address of module’s LAN port (Wireless included). (Read Only) MAC Address Decide whether the module’s DHCP server will be used.

  • Page 20: Dhcp Client Information

    Disable : VPN IPSec packet is not passed through WAN. (Default value) Enable : VPN PPTP packet is passed through WAN. PPTP Pass-through Disable : VPN PPTP packet is not passed through WAN. (Default value) © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 21: Static Rounting Setting

    Select whether the routing table is HOST or NETWORK Netmask If Range is NETWORK, enter subnet mask. Gateway Enter the gateway address to be passed when communicating with target. Interface Select whether the target is LAN or WAN. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 22: Wireless Setting

    11b/g/n mixed mode: 802.11b/g/n are supported. 11b/g mixed mode: 802.11b/g are supported. Network Mode 11b only: only 802.11b is supported. 11g only: only 802.11g is supported. 11n only: only 802.11n is supported © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 23 Decide whether to operate in 802.11g, if using TKIP. HT TxStream Setting for number of Tx antennas of 2T2R system. Setting for number of Rx antennas of 2T2R system. HT RxStream © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 24: Advanced Wireless Settings

    Smaller threshold size is recommended in case of many interruptions Threshold from surrounding signals. The setting range is 256~2346. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 25 Decide whether or not use DLS (Direct Link Setup) function. WMM Parameter If WMM is enabled, set the value for WMM Parameter. Multicast-to- Decide whether or not use Multicast function. Unicast © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 26: Wireless Security / Encryption Settings 오류! 책갈피가 정의되어 있지 않습 니다. 5.3.1. Wireless Security Setting

    Disable : Access Control function will be disabled.. Access Policy Allow Listed : allows communication with listed MAC client. Reject Listed: blocks communication with listed MAC client. Add a station MAC Enter the client’s MAC address for controlling. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 27 Improved WPA certified standard WPAPSKWPA2PSK Both WPZ-PSK and WPZ2-PSK are supported. WPA certified standard including 802.1x. WPA2 Improved WPA certified standard. WPA1WPA2 Both WPA and WPA2 are supported. 802.1x Radius authentication through WEP Key. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 28: Wireless Authentification Setting

    Enter at least 8 characters of character string for the network key value 5.3.2.3. Wireless 802.1x authentication  Enter the value for linking with the Radius Server.  The values related to the Radius Server are provided by the internet service company. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 29: Wds Setting

    AP function is not provided. Register the MAC of AP to be connected. Connect the registered MAC to the AP. Repeater Mode AP function is provided. (The performance of WDS is best in Repeater Mode.) © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 30: Wps Setting

    Shows the default key ID used with WPS. WPS Key(ASCII) Shows the WPS Key. AP PIN Shows the PIN value used when connecting to station. WPS Mode Select PIN or PBC. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 31 5.6 Wireless network status  The status of the station that is connected to WIZ630wi is shown.  The surrounding wireless AP’s status are shown.. Type Description Channel Channel information of AP SSID SSID of AP BSSID MAC address of AP...

  • Page 32: Ap Wireless Statistics

    Number of frames that failed to receive CTS Frames Receive Successfully Number of frames successfully received Frames Received With CRC Error Number of frames that failed due to CRC error Receiving signal strength © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 33: Serial To Lan(Wired And Wireless)

     Set the serial parameters for serial to wireless (ethernet) function.  Set two channels (Main connection, Aux connection) for each serial port  Setting management of Serial #1 and #2 (Main connection, Aux connection) © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 34: Main Connection Settings

    Serial to LAN operation mode. ( Client Mode recommended) - Server : waits for connection. Mode - Client : connected to the remote server of WIZ630wi - Mixed : not recommended Server IP Enter the IP address for WIZ630wi setting.

  • Page 35: Packing Condition (Incoming Serial Data Packing Condition)

    Main Port For example: In-come LAN Data : “abcdegf” Output data to Serial Port : “!MAIN!abcdegf” Before sending data from Aux port to serial port, WIZ630wi added a TAG in the front of payload. Aux Port For example: In-come LAN Data : “abcdegf”...

  • Page 36: Firewall Settings

    Type Description DMZ Settings Disable/Enable DMZ DMZ IP Address Input the IP address that you would like to expose all of its unused ports to the Internet © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 37: Port Forwarding

    7.2 Port forwarding When a computer on the internet sends data to the external IP address of the router (WIZ630wi), the router (WIZ630wi) needs to know what to do with the data. Port Forwarding simply tells the WIZ630wi which computer on the local area network to send the data to. When you have port forwarding rules set up, your router takes the data off of the external IP address:port number and sends that data to an internal IP address:port number.

  • Page 38: Packet Filtering

    7.3 Packet filtering  WIZ630wi can accept or block Internet packets according to pre-defined MAC or IP address  First, please do basic settings Type Description Source MAC Pre-defined source MAC address for MAC filtering function Dest IP Address Destination IP address...
  • Page 39 Host Filter function Block all the websites whose domain name contains the input text. Host Filter example, input “game”, websites like www.hangame.com, www.hangame.co.kr are blocked © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 40: System Security

     Defense of external attack. Type Description Remote management Settings about accessing methods from WAN to WIZ630wi’s embedded web server Telnet management Settings about accessing methods from WAN to WIZ630wi’s telnet Ping from WAN Filter Disable/Enable the WIZ630wi’s Ping response...

  • Page 41: System Management

    8. Managements 8.1 System Management © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 42 To use DynDNS, users should go to www.dyndns.org to create user name and domain name. And then, set related configurations by using WIZ630wi’s webpage. Similarly, to use freeDNS zoneedit, or no-ip,users should go to their homepage first to create user name and domain name.
  • Page 43 User’s company logo from the PC is applied to the system. Logo Import Settings ( GIF file size : 10K , 126x42) Load Factory Defaults Change the module’s setting to default setting. Reboot Reboots the system. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 44: Port Setting

    Enable / Disable Port #0. Port #1 Enable / Disable Port #1. Port #2 Enable / Disable Port #2. Port #3 Enable / Disable Port #3. Port #4 Enable / Disable Port #4. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 45 Description Memory Total System Memory Size Memory left System Free Memory Rx Packet Rx Packets counts Rx Byte Rx Bytes Counts Tx Packet Tx Packet Counts Tx Byte Tx Bytes Counts © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 46: System Status

    System Up Time Shows the system up time. Operation Mode Shows the operation mode currently being used. Internet Configuration Shows the internet configuration information. Local Network Shows the local network information. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 47: System Log

    8.7 System Log  The operation history of WIZ630wi can be checked by using System Log  If the system log exceeds 24Kbyte, more recent log record are added. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 48 9. Client(Station) Mode setting  WIZ630wi works as a WiFi client(station) which is always paired with a WiFi AP.  Users can take Client Mode as an opposite of Gateway Mode 9.1 Client Mode Setting Type Description Client(Station) Client mode setting...
  • Page 49 Channel information of AP to be connected. Channel information is needed only when Channel connecting with ad-hoc. Authentication Authentication method of AP to be connected. Encryption Encryption method of AP to be connected. Network Type Select AP / ad-hoc. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 50: Link Status

     HT항목은 802.11n으로 AP와 연결되었을 때만 나타난다. Type Description Channel Bandwidth. 20MHz or 40MHz. Guard Interval Long: 800nsec, Short: 400nsec STBC Supported only when value of MCS is 0-7. Shows link rate. Shows the receiving signal strength. © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 51: Site Survey

    9.4 Site Survey  Site Survey searches for AP surrounding WIZ630wi  Select an AP and click the connect button. (If the module is rebooted, the module will connect to the previous profile.)  Click “Add Profile” if user wishes to add to profile.
  • Page 52 Frames Received With CRC Error Number of frames received with CRC error. Frames Dropped Due To Out-of-Resources Number of frames dropped due to out of resources. Duplicate Frames Received Number of duplicate frames received. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 53 20/40MHz: Use 40MHz when wireless station that supports 11n channel bonding. Long: 800nsec, short: 400nsec Controls link rate. Tx Antenna Select number of Tx antenna in 2T2R system. Rx Antenna Select number of Rx antenna in 2T2R system. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 54 Saving Enable Direct Link function or not. Direct Link Setup In order to use Direct Link function, the AP connected to WIZ630wi and the Station to be connected must support Direct Link function. MAC Address Enter the MAC Address of the station to be connected using direct link function.
  • Page 55 Attempts connection with AP using PIN value. PBC Start Attempts connection with AP by virtually clicking the PBC button. Cancel Cancels the AP connection attempt. Renew PIN Renews the PIN value of WIZ630wi. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 56  One module operates as both AP and Station.  The wireless module connects to a different AP and functions as WAN port.  The channel of WIZ630wi must be identical to the channel of AP to be connected  Support wireless bridge.
  • Page 57 SSID of AP to be connected. Frequency Channel of AP to be connected. (Channel) MAC Address MAC Address of AP to be connected. (optional) Security elect the same security option with AP to be connected. © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 58  Client Mode connects to AP, whereas ad-hoc Mode connects with stations that use the same SSID.  Both 1:1 connection and 1:N connection are possible In case of 1:N, N is possible up to 255.  © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 59 LAN port 1 Link LED I/O, IPD GPIO0 WPS Button Push I, IPU CPURST_N I/O, IPD EJT_TDO Reset Button Push(GPIO17) I/O, IPD EJT_TRSTN GPIO21 UART2 Tx/Rx LED I/O, IPD EJT_TMS Serial Command Mode #1(GPIO19) © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 60 I/O, IPD EJT_TDI GPIO18 UART1 Tx/Rx LED I/O, IPD EJT_TCK WPS LED(GPIO20) I/O, IPD I2C_SCLK Serial Command Mode #2(GPIO2) I/O, IPD I2C_SD RUN LED(GPIO1) 3.3V 3.3V Table 5. WIZ630wi Pin Map © Copyright 2012 WIZnet Co., Inc. All rights reserved.
  • Page 61 13. Dimensions © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 62: Serial Commands

    14. Serial commands  Please refer to WIZ6x0wi Serial Command Guide © Copyright 2012 WIZnet Co., Inc. All rights reserved.

  • Page 63: Important Notice

    WIZnet assumes no responsibilities or liabilities for the use of any of its products, conveys no license or title under any patent, copyright or mask work rights to these products, and makes no representations or warranties that these products are free from patent, copyright or mask work infringement, unless otherwise specified.

Table of Contents