Lcd Contrast - Panasonic KX-TG5240M Operating Instructions Manual

Programmable Settings
Base unit ringer tone
Base Unit
Make sure the base unit is not being used.
1
Press [H] or [G].
• The base unit will ring at the current ringer tone.
2
Within 30 seconds, select the desired ringer
[G].
• The base unit will ring and the ringer tone will change.
• You can also select the ringer tone by pressing [1] to [7].
Selecting the base unit ringer tone by using the
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [B], then press the
soft key ( ).
SELECT
3
Scroll to "Set base unit" by pressing [d] or [B], then press the
soft key ( ).
SELECT
4
Follow steps 4 and 5 of "Handset ringer tone" on page 21.
• When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been set to OFF (p. 21), the base unit will not ring.

LCD Contrast

There are 6 levels of LCD contrast. The factory preset is level 3.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "LCD contrast" by pressing [d] or
[B], then press the soft key (
4
Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5
Press the soft key (
22
(use either the handset or the base unit)
Handset
SELECT
).
SELECT
), then press [OFF].
SAVE
by pressing [H] or
tone
Handset
Initial setting
).
LCD contrast
Ex. Level 3
LCD contrast
Low High