Date And Time - Panasonic KX-TG5240M Operating Instructions Manual

Date and Time

Handset
1
Press [MENU].
2
Scroll to "Date and time" by pressing [d]
or [B], then press the soft key (
3
(1) Enter 2 digits each for month, day and
year. (Ex. To set May 15, 2004, enter
"05 15 04".)
(2) Enter 4 digits for time (hour and minute).
(Ex. To set 9:30, enter "0930".)
• If you enter a wrong number, press the soft key
( ) or (
f g
the cursor to the incorrect number. Enter the
correct number.
4
Select "AM" or "PM" by pressing [*].
5
Press the soft key (
• The clock is set and "
• If 3 beeps sound, the setting is not correct. Start again from step 3.
6
Press [OFF].
• When entering the time, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter "0100", and select "PM"
The displayed time may be incorrect after a power failure. When "
the base unit display, adjust the date/time.
To confirm the date/time, repeat steps 1 and 2.
• The current date/time is displayed. When finished, press [OFF].
For Caller ID service users (p. 32)
• When a call is received, Caller ID information adjusts the date/time if the time is
incorrect.
• Caller ID information will automatically adjust the clock for daylight saving time.
• If the date/time has not been previously set, Caller ID information will not adjust
the date/time.
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
).
SELECT
), or press [d] or [B] to move
).
SAVE
E
" disappears from the base unit display.
B
Date and time
d
BACK P LAY SELECT
Date:| 1 2.31.2004
Time:12:00 AM
0-9=Date&Time
@=AM/PM
SAVE
f g
Date:05.15.2004
| | | |
Time:09:30 A M
0-9=Date&Time
@=AM/PM
SAVE
f g
.)
E
" flashes on
17