Selecting the LCD Contrast
You can program the handset LCD contrast (5 levels). To make the
handset display clearer, set to high level. Your phone comes from the
factory set to level 3.
Make sure the unit is in the standby mode.
(REDIAL/PAUSE/FUNCTION)
1
Press
(›)
(‹)
2
Press
or
repeatedly until the arrow
points to "Program".
EDIT (fl)
3
Press
.
4
While the arrow points to "LCD
EDIT (fl)
contrast", press
(›)
(‹)
5
Press
or
to select the desired
contrast.
≥Each time you press (›) or (‹), the LCD
contrast will change.
EDIT (fl)
6
Press
(Save key).
≥A beep sounds.
≥To return to the standby mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
.
Ringer volume
1Program
Save directory
TAD program
1LCD contrast
Chnge language
LCD contrast
.
Low
4 3
LCD contrast
Low
High
1=Save
High
21