Settings
Dialling Mode
The dialling mode is fixed to "Tone".
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
?
}
{
1
Press
2
Scroll to "Program ?" by
pressing {
4
{ OK } (Yes key).
3
Scroll to "Set dial mode ?"
by pressing {
4
Press { OK } (Yes key).
• KX-TS620EXW or KX-TS620EXB
is not designed to be used with
rotary (pulse dialling) services.
Dial mode
: Tone
5
Press { OK } (Save key).
• A long beep sounds.
• The display will return to step 3. To
exit the programming mode, press
{ ? }
or wait for 60 seconds.
• You can exit the programming mode any
{ ? }
time by pressing
14
.
} or {
} and press
3
} or {
4
3
}.
[OK]=Save
.
LCD Contrast
You can select the LCD contrast level
from 1 to 4 by programming. To make
the display clearer, set to high level.
Your phone default setting is 2.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the Speakerphone/headset {s/W}
indicator light is off.
?
}
{
1
Press
2
Scroll to "Program ?" by
pressing {
4
{ OK } (Yes key).
3
Scroll to "LCD contrast ?" by
pressing {
4
{ OK } (Yes key).
• The current setting is displayed.
LCD contrast
Low
4
Select the desired contrast by
pressing {
4
{ OK } (Save key).
• A long beep sounds.
• The display will return to step 3. To
exit the programming mode, press
{ ? }
or wait for 60 seconds.
• You can exit the programming mode any
{ ? }
time by pressing
.
} or {
} and press
3
} or {
3
} and press
!!!!
High
[OK]=Save
} or {
}, then press
3
.