Ringer Tone - Panasonic KX-TG5240M Operating Instructions Manual

Base unit ringer volume
Make sure the base unit is not being used.
To select HIGH (preset), MEDIUM or LOW, press [d] or [B].
• To increase volume, press [B]. To decrease volume, press [d].
To turn the ringer OFF, press and hold [d] until 2 beeps sound.
RINGER
• " " is displayed.
OFF
To turn the ringer ON, press [d] or [B].
• The ringer will sound at the LOW level.
• You can adjust the ringer volume while an outside call is ringing.
Press [d] or [B] while the base unit is ringing.
To set to OFF, press and hold [d] until "

Ringer Tone

You can select one of 7 ringer patterns for outside calls. "Tone 1" to "Tone 3" are bell
ringer patterns. "Melody 1" to "Melody 4" are preset melody patterns. The factory
preset is "Tone 1".
Handset ringer tone
1
Press [MENU].
2
Press the soft key (
setting".
3
Press the soft key (
tone".
4
Select the desired ringer tone by pressing
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been set to
OFF, the unit will not ring (p. 20).
• You can also select the ringer tone by pressing
[1] to [7].
5
Press the soft key (
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
Base Unit
RINGER " is displayed.
OFF
Handset
) at "Ringer
SELECT
) at "Ringer
SELECT
), then press [OFF].
SAVE
Ringer setting
Ringer tone
Ringer tone
1:Tone 1
21