Siemens SIMOVERT 6SE7024-1EB85-0AA0 Operating Instructions Manual page 69

11.98
Unit order No.
Siemens gR
Preferred type
6SE70 A
24-1EB85-0AA0
28-6EC85-0AA0 80
24-1FB85-0AA0
27-2FC85-0AA0 80
28-8FC85-0AA0 100
Table 3.2 Recommended mains fuses
Column 1: This fuse with gR characteristic protects the semiconductors. At the same time, they also have
line protection characteristic which can be used if the appropriate conductor cross-sections are
chosen, e.g. in accordance with DIN VDE 0100 Part 430 (to be applied for preference).
Column 2, 3: Semiconductor protection only, lines are not reliably protected. Discriminative line protection is
assured only by correlating the line protection fuses to the installed conductor cross-section in
accordance with the applicable regulations - e.g. DIN VDE 0100 Part 430.
Unit order No. Rated input-
voltage
6SE70
24-1EB85-0AA0 200 to 480
28-6EC85-0AA0 200 to 480
24-1FB85-0AA0 500 to 600
27-2FC85-0AA0 500 to 600
28-8FC85-0AA0 500 to 600
Table 3.3 Recommended commutation choke
Siemens AG 67087-6AC85-0AA0
Common Rectifier Operating instructions
Mains supply cable fuses
Column 1 Column 2
Siemens (SITOR)
(SITOR)
Type A
63
3NE1820-0 125
63
3NE1820-0 125
3NE1021-0 125
current Type
(V) (A)
36 4EP3700-2UK
74 4EP3900-2UK
36 4EP3700-1UK
62 4EP3900-1UK
82 4EP4000-1UK
Column 3
Bussmann
US-standard
Type A
3NE4118 63 170M3610
3NE3222 125 170M3613
3NE4118 63 170M3690
3NE3222 100 170M3692
3NE3222 160 170M3693
Commutation choke 2 %
Voltage / Frequency
(V / Hz)
400 / 50
400 / 50
500 / 50
500 / 50
500 / 50
Type
Rated current
(V / Hz) (A)
460 / 60 35,5
460 / 60 80
35,5
63
80
ENGLISH
Connection
3-3