D Belt Clip; D Connector Cover - Icom iF3200DEX series Operating Instructions Manual

1
ACCESSORIES
Attaching accessories (Continued)
D Belt clip
Before attaching or detaching the belt clip, remove the
battery pack if it is attached.
To attach the belt clip:
Slide the belt clip in the direction of the arrow until it
➥
locks and makes a 'click' sound.
To detach the belt clip:
Lift the tab up ( q), and slide the belt clip in the direc-
➥
tion of the arrow (w).
D Connector cover
To attach the connector cover:
Place the connector cover over the multi-connector.
q
(q)
Tighten the screw. (
w w)
To detach the connector cover:
Remove the screw using a Phillips screwdriver. (
q
Detach the connector cover to connect optional
w
equipment. (r)
CAUTION:
Attach the connector cover when the optional ac-
cessory is not used. Otherwise, the terminals of the
multi-connector may be shorted, and this could dam-
age the transceiver.
Tab
q
e)
1-4
Belt clip
w
w
q
e
r