Making An Emergency Call; D Lone Worker Emergency Call; D Man Down Emergency Call - Icom iF3200DEX series Operating Instructions Manual

3
BASIC OPERATION

Making an Emergency Call

When [Emergency] is held down for the preset time
period, the emergency signal is transmitted once, or
repeatedly*, on the specified emergency channel.
* Depending on the presetting.
When no emergency channel is specified, the signal is
transmitted on the operating channel.
A repeat emergency signal is automatically transmitted
until you turn OFF the power.
Depending on the presetting, receiving a matching sig-
nal cancels the transmission.
If you want to cancel the emergency call, hold down
[Emergency] again before transmitting the call.
If your transceiver is programmed for Silent operation,
you can transmit an Emergency call without the beep
sounding and the status indicator lighting.
IMPORTANT: We recommend you set an emergen-
cy channel individually to provide for reliable emer-
gency call operation.
NOTES
Depending on the presetting, the following functions
are automatically activated.
• Auto TX function
After the emergency call transmission, audio from the
microphone is automatically transmitted for a preset
time period.*
• Auto RX function
After the emergency call transmission, the transceiver
stands by in the Audible mode for a preset time pe-
riod.*
* Depending on the presetting.
D Lone Worker Emergency Call
When the Lone Worker function is turned ON, and no
operation is performed for the preset time period*, the
transceiver enters the emergency mode, and then the
countdown for the emergency call transmission starts.
After the preset time period* has passed, an emergency
call is automatically transmitted once, or repeatedly*.
If someone operates the transceiver before the call is
transmitted, the transceiver exits the emergency mode,
and the emergency call is cancelled.
* Depending on the presetting.
Hold down [Lone Worker] for 1 second to turn ON
q
the Lone Worker function.
w Push [Lone Worker] to turn OFF the Lone Worker
function.
D Man Down Emergency Call
When the transceiver has been left in a horizontal po-
sition for a preset time period, the transceiver enters
the emergency mode, and then the countdown for the
emergency call transmission starts.
After the preset time period, an emergency call is au-
tomatically transmitted once, or repeatedly, depending
on the presettings.
If the transceiver is placed in a vertical position before
the first transmission, it exits the emergency mode and
the emergency call is cancelled.
3-13