Key Switch
1- OFF (Engine Off )
2- ON
3- START (Engine Start)
Switch Panel
4- Work Light Switch
When the upper part of switch (4) is pushed, work lights
(8) located on the front side of the boom and canopy
(cab) come ON.
When the lower part of switch (4) is pushed, work lights
(8) go OFF.
5- Wiper Switch (Cab equipped machine)
Three (operational) positions are provided on this switch.
OFF:
Neither the wiper nor the washer operates.
Center:
The wiper operates.
WASHER: The washer operates together with the wiper.
6- Travel Mode Switch
Push
side of switch (6) to select the fast speed
mode. When travel load increases, the travel mode
automatically shifts to slow speed mode.
Push
side of switch (6) to select the slow speed
mode.
d
CAUTION: When the fast speed mode is set and load
becomes heavy, the travel mode will automatically
shift slow speed mode while displaying
when the travel load becomes light, it will shift to
the fast speed mode. Watch out for a sudden speed
change.
7- Auxiliary Flow Rate Selector (Optional)
The switch selects hydraulic oil flow in the auxiliary pipe
line.
OPERATOR'S STATION
. However,
1-5
1
2
3
4
5
6
7
MADB-01-007
MADC-01-003
8
M1M7-01-025