Mitsubishi Melsec-A AJ65SBT User Manual page 101

6 TROUBLESHOOTING
6 - 17
3) Action Status
Shows the operating status of the AJ65SBT-CLB.
Normal:
Data linking error:
All the station abnormality:
Remote I/O error:
Station out of control range:
SW changed during operation: Any switch position was changed during
Hardware error:
(2) Monitoring Other Station
The data link statuses, etc. of the CC-Link/LT remote stations connected to the
AJ65SBT-CLB are monitored.
(a) Operation procedure
Choose [Diagnostics]
1) In "Module Setting" box, select "CC-Link"
2) In the "Module No." or "I/O Address" box, specify the master module
connected with the AJ65SBT-CLB for which Monitoring Other Station will
be executed.
3) Check the "CC-Link Bridge" check box. At this time, the station number
of the AJ65SBT-CLB is searched for.
4) In the "Station" box, select the station number of the AJ65SBT-CLB for
which Monitoring Other Station will be executed.
5) Click the Start Monitoring button.
6) Click the Monitoring other station button.
Data links of all stations are normal.
There are one or more data link error
stations.
All remote stations are abnormal.
There are one or more remote I/O error
stations.
A remote station is connected after the
last refresh station.
operation.
An error occurred during a self-loopback
test (refer to Section 6.8).
[CC-Link / CC-link/LT diagnostics].
MELSEC-A
6 - 17